Peeling Paint on Middle Frame – Mobile Phone Frame Paint Removal by AQ-Laser
تقشير الطلاء على سطح الإطار الأوسط للهاتف المحمول
 

Peeling Paint on the Surface of the Middle Frame of the Mobile Phone – high-precision paint removal solution for mobile frame parts

The Peeling Paint on the Surface of the Middle Frame of the Mobile Phone is a high-precision laser processing service designed for the controlled removal of paint from the middle frames of mobile phones. Using advanced UV laser technology, this service delivers ultra-fine results with minimal impact on surrounding material. It’s ideal for manufacturers and repair services that require smooth, clean surfaces without deformation or damage to the substrate.

الميزات الرئيسية:

  • High precision: line width < 40 µm
  • Smooth finish: no deformation, bumps, or pits
  • Efficient processing: automatic clamping and positioning
  • Material versatility: compatible with stainless steel, aluminum, and other metals
  • Advanced workflow: 2D / 2.5D CAM software control

Certification and Standards:

Produced under rigorous quality management with traceable processes and inspection. Compliance with applicable ISO manufacturing standards for precision laser processing and metal finishing.

مواد

Stainless Steel SUS304:

Medical-grade SUS304 stainless steel (austenitic chromium-nickel alloy), offering excellent corrosion resistance and mechanical properties.

  • التوافق الحيوي: Low risk of allergic reactions or toxicity, ideal for direct tissue contact in medical procedures.
  • Mechanical Properties: High tensile strength (approximately 505 MPa) and elongation (up to 40%), providing flexibility without brittleness.
  • Surface Finish: Laser-machined for smooth, burr-free edges, reducing the potential for tissue trauma or contamination.
  • Thermal Stability: Maintains integrity across a wide temperature range, suitable for sterilization processes like autoclaving.

Aluminum alloy:

Aluminum Alloys are lightweight, medical-grade materials valued for their excellent corrosion resistance and high strength-to-weight ratio. With tensile strength typically ranging from 200–600 MPa and good ductility, they offer durability for medical and industrial applications. Their biocompatibility supports use in non-implantable devices and components. Laser-machined for smooth, burr-free surfaces, they minimize contamination risks and ensure compatibility with sterilization processes.

Other Metals

طلب
  • Mobile phone manufacturing: controlled paint removal on middle frames.
  • Refurbishment & repair: restore surfaces for resale and cosmetic quality.
  • 3C electronics: precision surface processing with tight visual tolerances.
تحديد
  • Technology: UV laser system, line width < 40 µm.
  • Surface outcome: smooth finish; no pits, bumps, or deformation.
  • Materials: stainless steel, aluminum, and compatible metal alloys.
  • Fixturing: automatic clamping and positioning for repeatability.
  • Software: 2D / 2.5D CAM control for consistent processing paths.

عزز إنتاجيتك اليوم

نحن على استعداد لتزويدك بعينة مجانية من أي من منتجاتنا

أو اتصل: +971505440730
  • أجهزة الليزر الدقيقة للدعامات الطبية.
  • مواد عالية الجودة للمعدات الطبية.
  • حلول القطع بالليزر للأنابيب السفلية.
  • آلات متخصصة للمكونات الجراحية.
  • قطع أنابيب النيتينول بدقة.
  • قطع الكوبالت والكروم للغرسات الطبية.
  • مواد البلاتين والإيريديوم للتطبيقات الدقيقة.
  • آلات موثوقة للمعادن فائقة الرقة.
  • توريد سبائك النيتينول والكوبالت والكروم.
  • أجهزة الليزر الدقيقة للدعامات الطبية.
  • مواد عالية الجودة للمعدات الطبية.
  • حلول القطع بالليزر للأنابيب السفلية.
  • آلات متخصصة للمكونات الجراحية.
  • قطع أنابيب النيتينول بدقة.
  • قطع الكوبالت والكروم للغرسات الطبية.
  • مواد البلاتين والإيريديوم للتطبيقات الدقيقة.
  • آلات موثوقة للمعادن فائقة الرقة.
  • توريد سبائك النيتينول والكوبالت والكروم.
الكتالوج شاهد كل شيء القائمة

نستخدم ملفات تعريف الارتباط لتحليل الأحداث على موقعنا. بمواصلة تصفح الموقع، فإنك توافق على شروط الاستخدام.

هل تحتاج إلى مساعدة؟

ماذا تريد؟ على سبيل المثال,القطع بالليزر