Peeling Film of Transparent Plastic Parts – Film Removal by AQ-Laser
שכבה מתקלפת של חלקי פלסטיק שקופים
 

Peeling Film of Transparent Plastic Parts – precision film peel service for transparent plastic components

Peeling Film of Transparent Plastic Parts is a laser-based processing service that removes protective or tinted films from transparent plastic components without damaging the underlying plastic. Using controlled laser ablation (or peeling) methods, the film layer is cleanly and precisely removed, leaving the plastic clear and intact. Perfect for medical, diagnostic, and transparent instrument parts that require high clarity, no residue, and surface integrity.

תכונות עיקריות:

  • Precise film removal: clean separation of film from substrate without affecting the transparent plastic
  • Optical clarity preserved: no haze, clouding or surface distortion after peeling
  • Minimal heat-affected zone: laser settings tuned to limit thermal damage and maintain mechanical strength
  • No coatings or adhesives needed: process works without chemical strippers or additional coatings
  • Repeatable and clean finish: consistent results, edges smooth, surface ready for further processing or assembly

Certification and Standards:

Produced under stringent quality management with full traceability and verification. Compliant with relevant ISO standards for medical devices, polymers, and laser processing to ensure safety, biocompatibility, and cleanroom suitability.

חומרים

Transparent Plastic:

Plastic is widely used in the manufacturing of medical devices due to its lightweight properties, cost-effectiveness, and design flexibility. Medical-grade plastics are biocompatible, resistant to corrosion and chemicals, and can withstand sterilization processes, making them safe for direct contact with patients. Their versatility allows the production of complex shapes and components with consistent quality, supporting innovation in surgical instruments, diagnostic equipment, and disposable medical products.

Teflon

Teflon is a fluoropolymer material widely recognized for its exceptional non-stick properties, chemical resistance, and low friction coefficient. In medical applications, it is valued for its biocompatibility, durability, and ability to maintain performance under sterilization processes, making it suitable for coatings, tubing, and surgical instruments.

PTFE

PTFE (Polytetrafluoroethylene) is a high-performance polymer known for its excellent thermal stability, chemical inertness, and electrical insulation properties. In the medical field, PTFE is commonly used in catheters, grafts, and tubing due to its biocompatibility, resistance to bodily fluids, and ability to ensure smooth, low-friction surfaces.

בַּקָשָׁה
  • Medical device housings: peeling protective films from transparent plastic windows.
  • Diagnostic equipment: restoring clear lenses or display covers by removing film layers.
  • Transparent plastic parts in instruments: parts used in illumination, optics, sensors where clarity is critical.
מפרט טכני
  • Laser type: UV or appropriate wavelength ablation lasers to target film absorption.
  • Peel width accuracy: typically < 50 μm margin of error around peel boundary.
  • Surface finish: no burn marks, no melting or micro-bubbles.
  • Material compatibility: polycarbonate, acrylic, PET, and similar transparent plastics.
  • Environmental durability: peeled area withstands cleaning, sterilization, without delamination or discoloration.

הגבירו את הפרודוקטיביות שלכם עוד היום

אנו מוכנים לספק לכם דוגמית חינם מכל אחד מהמוצרים שלנו

או ז'אנרים: +971505440730
  • מכונות לייזר מדויקות עבור סטנטים רפואיים.
  • חומרים איכותיים לציוד רפואי.
  • פתרונות חיתוך לייזר להיפוטובס.
  • מכונות ייעודיות לרכיבים כירורגיים.
  • חיתוך צינורות ניטינול בדיוק רב.
  • חיתוך קובלט-כרום עבור שתלים רפואיים.
  • חומרי פלטינה-אירידיום ליישומים עדינים.
  • מכונות אמינות למתכות דקות במיוחד.
  • אספקת סגסוגות ניטינול וקובלט-כרום.
  • מכונות לייזר מדויקות עבור סטנטים רפואיים.
  • חומרים איכותיים לציוד רפואי.
  • פתרונות חיתוך לייזר להיפוטובס.
  • מכונות ייעודיות לרכיבים כירורגיים.
  • חיתוך צינורות ניטינול בדיוק רב.
  • חיתוך קובלט-כרום עבור שתלים רפואיים.
  • חומרי פלטינה-אירידיום ליישומים עדינים.
  • מכונות אמינות למתכות דקות במיוחד.
  • אספקת סגסוגות ניטינול וקובלט-כרום.
קטלוג צפה בכל תפריט

אנו משתמשים בקובצי Cookie כדי לנתח אירועים באתר שלנו. על ידי המשך גלישה באתר, הנך מקבל את תנאי השימוש

צריכים עזרה?

Что будем искать? לדוגמא,חיתוך לייזר